First, remove the deck from the machine and you can use the walking belt instructions in the attached file to help you do that part.

Then, remove the old Mylar layer. Using an erasable marker, mark the position of the original deck padding and then remove the original deck padding. The black colored part of the new deck padding will face up when installed.

Remove the cover on the two-sided tape that is already pre-installed on the deck padding.

Install the new deck padding in the same area using the two-sided tape to fasten the padding to the deck surface.

To install the Mylar, move on to the included Mylar Fixkit instructions and skip through the first part that explains how to remove the Mylar and begin at the part that explains how to install the new Mylar.